Goal: By nitriding, the surface is very hard and abrasion resistant. Due to the low annealing temperature (up to about 500 ° C), the torsion…
Articles
Goal: Creating a level of abrasion resistance and soft brain and stiffness in structural components Application: Structural components that are under abrasion and bent or…
Goal: The purpose of this thermal treatment is to achieve a granular structure, while increasing offset yield strength and toughness and a slight change in…
Goal: Tool steels that require high dimensional stability should be aged after hardening or returning. As a result of aging, much of the remaining austenite…
Goal: The hardened work piece is extremely crunchy. By performing the return operation, hardened steel, stiffened, its hardness decreases slightly and the residual tensions are…
Goal: With heat treatment, the hardness and abrasion resistance of the materials increase. This, of course, is associated with a decrease in toughness and –…
Annealing Annealing is a gentle heating up to a specified temperature with or without maintenance at annealing temperature and subsequent cooling down. The most important…
A summary of thermal treatment methods: The molds used in molding should meet the properties of the mold in terms of abrasion resistance, toughness and…
