Na/Cb Melting point 1950 ° C 16- Niobium / Columbia Ta Melting point is 3030 ° C 17- Tantalum These elements are usually taken together…
Cr Melting point is 1920 ° C 9- Chrome The presence of chromium in steel makes it hardened in oil and air. By reducing the…
In the case of alloying elements, it can be distinguished, essentially, from their role in terms of their role as carbide, austenite, or ferrite or…
Goal: In the induction hardening, only the surface layer is hardened. In this way, a piece with a hard and abrasion resistance surface is obtained…
Goal: By nitriding, the surface is very hard and abrasion resistant. Due to the low annealing temperature (up to about 500 ° C), the torsion…
Goal: Creating a level of abrasion resistance and soft brain and stiffness in structural components Application: Structural components that are under abrasion and bent or…
Goal: The purpose of this thermal treatment is to achieve a granular structure, while increasing offset yield strength and toughness and a slight change in…
Goal: Tool steels that require high dimensional stability should be aged after hardening or returning. As a result of aging, much of the remaining austenite…
Goal: The hardened work piece is extremely crunchy. By performing the return operation, hardened steel, stiffened, its hardness decreases slightly and the residual tensions are…
Goal: With heat treatment, the hardness and abrasion resistance of the materials increase. This, of course, is associated with a decrease in toughness and –…
